Spray foam insulation in Santa Barbara CA - the right foam for each wall and roof
Hot upstairs, drafty rooms or a tired attic? Spray foam seals the gaps and insulates in one step, with your time away planned first.
- Fully licensed and insured.
- Free in-person estimates.
- We reply within 1 business day.
Is spray foam the right insulation for your Santa Barbara home?
Spray foam insulation in Santa Barbara is foam our installers spray onto an attic roof, a wall or a crawl space, where it hardens in place so it fills the gaps and insulates in the same step. It can go in any part of your house's insulated shell where more common insulation goes today.
Most calls start with a hot room upstairs, a drafty bedroom or a room over the garage that never feels right. The price moves with the size of the area, how thick the foam goes, which foam each part of the house needs and whether a leak or old insulation has to be dealt with first. The schedule turns on that repair work, any permit, and the time your household has to be out while the foam goes in and cures. I put both in the plan you get at the estimate, so you see your own numbers before you decide.
How do you know your house could use spray foam?
Hot upstairs all summer
The bedrooms upstairs stay warm long after the sun goes down while the rest of the house cools off. That usually means heat is soaking through the roof and slipping in around gaps, and every month you wait the cooling works harder and the power bill shows it.
Drafts at outlets and trim
You feel cool air at outlets, baseboards or around the attic hatch on a breezy night. Air is getting through gaps the old insulation never closed, and laying more insulation over them just leaves it fighting the draft.
The room over the garage
The floor is cold in winter, the room is stuffy in summer, and nobody wants to sleep there. That floor is often thin and leaky, so waiting means one room you don't use and a bill that stays high anyway.
Often done alongside spray foam
Attic insulation
When the attic floor is thin or patchy, adding insulation there can fix hot upstairs rooms without foaming the whole roof.
Blown-in insulation
A lower-cost way to bring a thin attic back up to depth once the gaps are sealed.
How we do spray foam insulation
Before anything is booked, I sit down with you and plan the time your household will be out of the house, because nobody should be living there while the foam goes in. Then I go part by part through the roof, the walls and the crawl space and pick the foam that suits each one, since they don't all handle moisture the same way. On work day our installers fix whatever the plan flagged first, cover floors, windows and anything that stays in the space, and spray the foam to the depth we agreed on. Once it has cured, the crew airs the house out and cleans up before you come back.
Open-cell foam
A softer, lighter foam that blocks air well and usually costs less per inch than closed-cell. It tends to suit attic roofs and inside walls where you want the drafts gone and moisture isn't the main worry.
Closed-cell foam
A dense foam that holds back moisture as well as heat and packs more insulation into a thin layer. It tends to suit crawl spaces, rim joists and tight framing where there isn't room for a thick layer.
Get a spray foam plan and estimate for your house
Send the form and we reply within one business day to set up my visit. The on-site estimate is free with no pressure to book, and calling (805) 284-9538 works too.
Call (805) 284-9538Why homeowners around Santa Barbara call us for spray foam
I come out for every estimate
I do the first look and the estimate myself, and our installers spray from the plan I wrote. When they're done I come back and walk the finished job with you, so the person answering your questions knows the whole job.
Planning jobs in order since 2017
We've been in business since 2017, and I learned the trade working beside installers in attics and crawl spaces after years running the schedule for a busy company. That's why every job gets planned in the right order, so nothing new goes over a problem that should have been fixed first.
Licensed, insured and open to questions
We're fully licensed and insured. EPA suggests checking a spray foam contractor's training, insurance, licenses and references before you hire, and I'll answer those questions at the estimate as many times as you need.
We check who issues your permit
The City of Santa Barbara generally requires a building permit to alter, repair or improve a building, and before we book we check whether your address falls under the city, the county or the university. When a permit is needed, we apply for it, set up the inspections and tell you how they fit your schedule.
With spray foam, the order of the work decides how it turns out, so book your estimate and I'll walk through the house with you part by part.
What happens after you call about spray foam in Santa Barbara?
Call or send the form
You call (805) 284-9538 or send the form, and we set a time for me to come out. You can ask me anything on that first call, even if you've asked it before.
I look and write the plan
I look at each part of the house, note anything that has to be fixed first and write up a plan with the price. You see which foam goes where and what it costs before you decide anything.
We book it in order
Once you say yes, we sort out any permit and book the work so repairs come ahead of the foam. Your time away goes on the calendar at the same time, so the day doesn't surprise anyone.
Work day and walk-through
Our installers do the work while your household is away. After you're back, I return to walk the finished job with you and answer whatever's left.
Common questions
How much does spray foam insulation cost in Santa Barbara?
Spray foam insulation in Santa Barbara usually costs about $2,000 to $4,500 for a 1,000 square foot area sprayed 3 inches thick. That's the going rate for that size and depth around here, not our quote. A bigger area, a thicker layer or a different foam moves it, and your own number comes from the estimate.
Should I choose open-cell or closed-cell spray foam?
Choose by how each wall or roof needs to handle moisture. Open-cell foam blocks air well and counts as airtight at typical thickness, but it still lets water vapor pass through. Closed-cell foam at typical thickness slows vapor, so a frame wall filled with it won't dry well to the outside, and the foam has to match how that wall dries.
How long do I have to stay out of the house after spray foam?
Plan to be out while the foam is sprayed and until it has cured and the house has been aired out and thoroughly cleaned, which is what EPA advises for everyone living there and for other trade workers. Some foam makers recommend waiting 24 hours after a professional high-pressure job before moving back in, though the time can vary by product. Line up a place to stay and keep other trades off the house during that stretch.
Is spray foam safe if someone in my home has asthma?
It may not be the best fit, because EPA says people with asthma, respiratory allergies, skin conditions or an earlier sensitivity to isocyanates should read the product information carefully and may want to consider other insulation. EPA also notes that isocyanates, the key chemical in spray foam, and other foam chemicals in vapor, mist and dust can cause asthma, lung damage and skin and eye irritation during and after installation. Tell me about it at the estimate and we'll talk through other ways to insulate.
What is the best way to insulate an attic, spray foam or blown-in?
For most attics, sealing the gaps and topping up with loose fill usually wins, because foam costs more even though it seals air while it insulates. The exception is when your ductwork runs through the attic, since foaming the roof brings those ducts inside the insulated part of the house. I'll tell you which one your attic calls for when I'm up there.
Can spray foam go over old insulation in my attic?
Not when the old material is soaked or full of droppings, because the new work just hides the problem and has to come back out later. I check what's up there on the first visit. If it has to go, insulation removal comes first so the new work starts clean.
Get a spray foam plan for your house
When you call or send the form, have the rough size of the area, the parts of the house you want insulated and any asthma or allergies at home handy, so the first visit covers what matters to you.